Carmanah R247-F Kurulum Kılavuzu - Sayfa 10

Aydınlatma Ekipmanları Carmanah R247-F için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Carmanah R247-F 20 sayfaları. Traffic beacon
Ayrıca Carmanah R247-F için: Hızlı Başlangıç Kılavuzu (20 sayfalar), Enerji Yönetim Sistemi Değiştirme Kılavuzu (12 sayfalar), Kurulum Kılavuzu (20 sayfalar)

• Obtain 3" of red and 3" of black wire supplied with the kit.

• Strip ends of both wires 0.35".

• Use small flat bladed screwdriver to depress each terminal button and insert the wire into the terminal.

• Install one end of the red wire into the left BAT+ terminal.

• Install one end of the black wire into the right BAT− terminal.

• Insert the other end of each wire into two of the 5-position splice terminals.

• Route the two red battery harness wires into the

splice terminal with the red wire from BAT+.

• Route the two black battery harness wires into the

splice terminal with the black wire from BAT−.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com

Install Battery Jumper Wires and Splice Terminals

Make sure all wire strands go into the terminal hole.

APPLIED INFORMATION (AI) INTEGRATION INSTALL GUIDE

Red

Black

wires

F Series

Page 10