Carmanah F Series Kurulum Kılavuzu - Sayfa 10

Güvenlik Sistemi Carmanah F Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Carmanah F Series 20 sayfaları. Rrfb mast arm kit
Ayrıca Carmanah F Series için: Hızlı Başlangıç Kılavuzu (20 sayfalar), Kurulum Kılavuzu (16 sayfalar), Enerji Yönetim Sistemi Değiştirme Kılavuzu (12 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Değiştirme Kılavuzu (9 sayfalar), Kurulum Kılavuzu (18 sayfalar)

• Obtain 3" of red and 3" of black wire supplied with the kit.

• Strip ends of both wires 0.35".

• Use small flat bladed screwdriver to depress each terminal button and insert the wire into the terminal.

• Install one end of the red wire into the left BAT+ terminal.

• Install one end of the black wire into the right BAT− terminal.

• Insert the other end of each wire into two of the 5-position splice terminals.

• Route the two red battery harness wires into the

splice terminal with the red wire from BAT+.

• Route the two black battery harness wires into the

splice terminal with the black wire from BAT−.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com

Install Battery Jumper Wires and Splice Terminals

Make sure all wire strands go into the terminal hole.

APPLIED INFORMATION (AI) INTEGRATION INSTALL GUIDE

Red

Black

wires

F Series

Page 10