Carmanah SC315-G Kurulum Kılavuzu - Sayfa 6

Güvenlik Sistemi Carmanah SC315-G için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Carmanah SC315-G 14 sayfaları. Cabinet-based systems
Ayrıca Carmanah SC315-G için: Hızlı Başlangıç Kılavuzu (16 sayfalar), Manuel (11 sayfalar), Enerji Yönetim Sistemi Değiştirme Kılavuzu (12 sayfalar), Dolap Kapağı Değiştirme Kılavuzu (10 sayfalar), Manuel (9 sayfalar), Manuel (10 sayfalar), Manuel (10 sayfalar), Manuel (10 sayfalar)

4.0 G Series Cabinet Installation

4.1

1. Remove power to the system. For AC-powered systems, turn off the circuit breaker in the cabinet and for

solar-powered systems remove the battery and solar fuses.

2. Use the indentation in the center of the cabinet to locate the tip of the drill bit. Drill a ½" hole on top of the

enclosure. Deburr hole and remove all aluminum chips.

Ensure the equipment is not powered during installation. Recheck all wiring prior to energizing

the system.

Ensure all metal chips are removed to prevent system damage caused by short circuits.

Ensure that no burrs are present that would prevent the antenna from making a good seal with

the top of the cabinet.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

APPLIED INFORMATION (AI) INTEGRATION

INSTALL GUIDE

carmanah.com