Carmanah E Series Kurulum Kılavuzu - Sayfa 10

İnvertör Carmanah E Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Carmanah E Series 16 sayfaları. Rrfb mast arm kit
Ayrıca Carmanah E Series için: Hızlı Başlangıç Kılavuzu (20 sayfalar), Enerji Yönetim Sistemi Değiştirme Kılavuzu (12 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (18 sayfalar), Değiştirme Kılavuzu (9 sayfalar), Kurulum Kılavuzu (18 sayfalar)

14. Install the wires into the terminals as follows:

•

Violet → 3-position splice terminal with red wire going to PBS+

•

Blue → EXT1

•

Red → Middle BAT+

•

Black → Middle BAT-

15. Align ends of heat-shrink on both harnesses near end of sheet metal tab. Install a cable tie around both

harness and sheet metal as shown below

If the system has a pushbutton, insert the positive pushbutton wire into the empty position of the

3-positio splice terminal.

16. Remove red solar panel wire from the PV+ terminal. Insert red wire into 3-position splice terminal.

17. Insert one end of 3" yellow wire from step 2 into PV+ terminal. Insert other end of 3" yellow wire into 3-

position splice terminal.

18. Insert yellow wire from AI 16-pin harness into third splice terminal position.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

APPLIED INFORMATION (AI) INTEGRATION

INSTALL GUIDE

carmanah.com