ATI Technologies RADEON Series Özellikler Kılavuz - Sayfa 3

Ekran Kartı ATI Technologies RADEON Series için çevrimiçi göz atın veya pdf Özellikler Kılavuz indirin. ATI Technologies RADEON Series 8 sayfaları. Using video in/video out

Sayfayı Yazdır

View your PC's display on a television!

Your new RADEON™ graphics card has Video Out (also known as TV Out)

capability. Just attach your new card to a television, a monitor, or both. You can

even attach your graphics card to your VCR and record your computer's display.

Television display is ideal for playing games, giving presentations, watching

movies, and browsing the Internet. The following tips will help you get the most

out of your Video Out feature.

• Some PC monitors in Europe cannot be used simultaneously

with television display. When you enable television display in

Europe, the refresh rate for the monitor and television is set to

50Hz. Some monitors may not support this refresh rate and could

be damaged.

Please check the documentation supplied with your monitor to

see if your monitor supports a refresh rate of 50Hz. If your

monitor does not support 50 Hz (or you are not sure), then

turn off your monitor before turning on your computer when

using your television as a display.

For information about how to disable television display, see

Enabling and Disabling the Television Display on page 5.

• Some televisions in Europe may use a SCART connection. If you

use SCART, read Using SCART Connectors for European

Televisions on page 5 before attempting to connect your PC to

your television.

Connecting your PC to a television or a VCR

To connect your computer to a television or a VCR, attach a connector cable from

the television (or VCR) to your card. Most televisions and VCRs have a

Composite video input, also referred to as a phono jack or RCA input. A growing

number of televisions and VCRs have another type of video input called S-Video

or S-VHS. An S-Video connection produces a higher quality display than

Composite video. If your television has cable input only, which is the case on

older units, you can connect your graphics card to your television using your

VCR or an RF modulator (available in most electronics stores).

RADEON™ Using Video In/Video Out

Using Video Out

IMPORTANT INFORMATION

for European Customers