CommScope FACT Kurulum Talimatı
Endüstriyel Ekipmanlar CommScope FACT için çevrimiçi göz atın veya pdf Kurulum Talimatı indirin. CommScope FACT 8 sayfaları. Fanout fixation kit
Ayrıca CommScope FACT için: Kurulum Talimatları Kılavuzu (9 sayfalar), Kurulum Talimatı (12 sayfalar), Kurulum Talimatı (8 sayfalar)
Sayfayı Yazdır
TC-1302-IP
Rev A, Apr 2017
www.commscope.com
Contents
1
Routing 250µm with overtubing
on BOTTOM TRAY
1.1
Remove plastic cover on splice island.
1.2
Open bend control cover and FACT back lid.
Splice/Patch: 250µm with overtubing and patch cords
Patch/Patch: Pigtail to pigtail
1
Routing 250µm with overtubing on BOTTOM TRAY
2
Routing 250µm with overtubing on TOP TRAY
3
Routing patch cords on BOTTOM TRAY (right side)
4
Routing patch cords on TOP TRAY (right side)
5
Routing patch-patch on BOTTOM TRAY (left side)
6
Routing patch-patch on TOP TRAY (left side)
1.3
1.4
1
FACT Cable Routing
I N S T A L L A T I O N I N S T R U C T I O N
Guide overtubing into bend control. (Refer to cable
attachment guide)
Guide tubing through channel of the defined tray.