Andea Electronics TPAD10M Kullanıcı Kılavuzu - Sayfa 14
Tarayıcı Andea Electronics TPAD10M için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Andea Electronics TPAD10M 19 sayfaları. Rfid pad reader
Sayfayı Yazdır
5.1.5. System Work Mode
Figure 14 Configuration interface for system work mode
⚫
Mode:
1) Host mode: the host software needs to send commands.
2) Scan mode: the inventory can be automatically completed, even if the host
software does not send commands; scan setting in the scan mode should be
configured in advance.
⚫
Scan Mode Configuration:
1) Filtered time of duplicated tag(sec): The tag can only be counted again after
leaving for the specified time.
2) Port of data output: Uart1 output, USBHID output, virtual keyboard output,
Wiegand 26, Wiegand 34.
3) Scan option
① Output UID: output the tag UID.
② Output block's data: output the content of the data block (not including the
security status byte).
③ Output format of block's data:
A. Format as hex string.
B. Format as ASCII.
Guangzhou Andea Electronics Technology Co., Ltd.
http://www.gzandea.com
User manual
12/16