ATI Technologies 39-0080 Servis Kılavuzu - Sayfa 9
Ölçüm Cihazları ATI Technologies 39-0080 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. ATI Technologies 39-0080 15 sayfaları. Milk meter
Sayfayı YazdırInnovation In and Out of Parlour
Service Interval For The Milk Meter
During the maintenance of the Milk Meter the following checks/changes have to be carried out:
Every Week or 32 Hours
n
Check the general standard of Milk Meter cleanliness
n
Check the bleed hole is clear
Check the sensors and make sure there is no milk build up on the probes
n
Every Month or 125 Hours
n
Check the general standard of Milk Meter cleanliness
n
Check the bleed hole is clear
n
Check the sensors and make sure there is no milk build up on the probes
Every 6 Months or 750 Hours
n
In addition to the monthly checks, check the tightness of the cable glands and lids on all electrical and
electronic boxes
n
Check the seals on all boxes are in good shape and not damaged or broken
n
Check the ACR ram and make sure it operates smoothly
Every Year or 1500 Hours
n
In addition to the monthly and six monthly checks, calibrate the Milk Meter
n
Change the diaphragm
n
Change the plunger seal
n
Change the bottom seal
n
Change the 3 sensor grommets
n
Examine the Milk Meter plastic mouldings
n
Change the shut-off valve diaphragm
9 | Milk Meter Service Manual | v1.2