Dreamland D3331 Kullanım Talimatları Kılavuzu - Sayfa 7
Aksesuarlar Dreamland D3331 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Dreamland D3331 12 sayfaları. Intelliheat heated overblanket
Sayfayı Yazdır
WARNING! DO NOT use this appliance if there are visible
signs of damage.
WARNING! NOT suitable for children under the age of 3.
Your Dreamland Intelliheat overblanket is designed to FAST PREHEAT your bed and it also responds
to temperature changes while you sleep.
IMPORTANT: The time required to heat the electric blanket may vary depending on the room
temperature. To judge the temperature accurately, lie in the bed with the covers draped over
you. Do not rely on a hand placed on the bed.
WARNING! This appliance is only to be used with the control
unit supplied with it. The reference of the control unit is
specified on the label sewn onto the appliance.
WARNING! DO NOT place the control unit under the pillow or
under the sheets when in use.
Connect the control connector into the blanket socket then plug into the mains socket.
Switch on your Intelliheat overblanket from the back of the control (11) Diagram [D], by positioning the
switch ON (I). The temperature setting (4) Diagram [D] will default to the last one used, providing it has
been set to that number for a period longer than 5 minutes.
TO HEAT UP YOUR INTELLIHEAT OVERBLANKET, YOU MUST ALWAYS PRESS THE READY FOR
BED FAST PREHEAT BUTTON. DO NOT GET INTO BED WITH YOUR OVERBLANKET ON THE
READY FOR BED FAST PREHEAT TEMPERATURE SETTING.
READY FOR BED FAST PREHEAT: Press the Ready for Bed, fast pre-heat button on the front of the
control (8) Diagram [D]. The setting (5) (Diagram D) will be illuminated in red on your LED Display (3)
(Diagram D). Your blanket will be lovely and warm in just 5 minutes.
TO SET FOR ALL NIGHT USE: RELEASE the Ready for Bed fast pre-heat button, and press the
temperature button (9) Diagram [D] to select your preferred all night temperature setting from 1 (min) to
5 (max). The higher the number, the higher the temperature. This will be illuminated in orange on the (3)
LED display (4) (Diagram C).
1 OR 9 HOURS AUTO SHUT OFF TIMER: The Intelliheat control has an AUTOMATIC SHUT OFF TIMER.
To set the timer, press the timer button (7) Diagram [D] and select either 1h or 9h. This will be illuminated
in green on the (3) LED Display (6) Diagram [D].
TIMER OFF/STANDBY: When the set time period has elapsed, the overblanket will automatically switch
off and the standby light will be illuminated in blue on the (3) LED display (10) Diagram [D]. If you wish to
switch your overblanket back on again, press the timer button (7) Diagram [D] selecting either 1 or 9 hours.
MANUAL SWITCH OFF BOTH OVERBLANKET AND CONTROL: Switch off the back of your Intelliheat
control (11) Diagram [D] to off (O) position.
MEMORY FUNCTION: After using your overblanket for more than 5 minutes, the Intelliheat control will
remember your last temperature setting.
MI002688_D33.indd 5
USING YOUR BLANKET
EN
5
30/03/17 16:02