Anden A130 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 7
Nem Alıcı Anden A130 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Anden A130 12 sayfaları.
Sayfayı Yazdır
SYSTEM SET-UP & CHECKOUT
Skip set up and proceed to INSTALLER TEST MODE on page 8 unless:
• A Model A77 or other external control is to be installed
• changing the air sampling rate
1. Make sure the wire access cover has been snapped back onto the
on-board control.
2. Plug unit in and turn power switch to ON.
3. The on-board control screen should display OFF.
90-1854
NOTE: If the display backlight is not on, the first button press (any
button) will only turn on the backlight. Press the button a second time
to achieve function.
4. Hold the MODE button on the on-board control for 3 seconds to
enter the Installer Set-up Menu.
5. Navigate through the following screens to set up the dehumidifier
for the installed application.
Use the UP or DOWN buttons to select items and use MODE to
switch to the next set-up option. To exit installer set-up, all options
must be scrolled through using the MODE button.
6. After the installer set up options have been completed, DONE will
blink for 3 seconds and the control will return to the OFF screen.
90-1854
REMOTE CONTROL
VENTILATION
The ventilation feature can be used for air cycling if desired. The air
cycling time can be set from 0 to 60 minutes. The dehumidifier will turn
on the dehumidifier fan to cycle air for the set time, every hour.
90-1854
If not installing an A77, leave
DISABLED and press MODE to go
to the next screen..
90-1854
If installing an A77, use the UP or
DOWN button to select ENABLED,
then press MODE to go to the next
screen.
90-1854
If not using the dehumidifier to
cycle air, leave DISABLED and
press MODE to go to the next
screen.
90-1854
If using the dehumidifier for air
cycling, use the UP or DOWN
button to select ENABLED, then
press MODE to go to the next
screen.
90-1854
Press MODE at the VENT TIMED
screen to set the air cycling time.
90-1854
Press the UP or DOWN button to
adjust the air cycling time per hour
from 0 to 60 minutes. After
selecting time, press MODE to go
to the next screen.
90-1854
7