Dreamland R6705 Kullanım Kılavuzu - Sayfa 7

Isıtma Pedi Dreamland R6705 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Dreamland R6705 12 sayfaları.

not tamper with it. Contact an authorised technical service

centre for any repairs.

• This appliance shall not come into contact with water, other

liquids, sprays, steam. For any cleaning and maintenance

operation refer to the instructions in the relevant chapter.

•

DO NOT use this appliance to warm animals.

• See the external packaging for the characteristics of the

appliance.

• Insert the control unit connector (5) into the heating pad connector (6)

to connect the control to the heating pad.

• Insert the plug in the mains socket.

• Place the heating pad (MOD.1 or MOD.2) on the part of the body that is

to be heated (FIG. A). Place the neck and shoulder heat pad (MOD.3)

around your neck and secure in place with the velcro fastening (FIG.B).

SWITCHING ON AND SELECTING THE RIGHT TEMPERATURE

The control unit can be set to the following temperature levels:

5: Fast pre-heat temperature

4-3-2: Medium temperatures

1: Temperature for prolonged use

• Switch the heating pad on by pressing the ON/OFF button (4). The

temperature is automatically set at level 5, so LED 5 (1) will light up on

the control unit.

• To heat the heating pad quickly, use the maximum temperature 5. You

can then set a lower temperature level, depending on the degree of heat

required. To change the temperature, press the temperature selector (3)

until the LED (1) corresponding to the required level lights up on the control

unit. The higher the number selected, the higher the temperature.

• If the heatpad is used for a prolonged time, or when it's likely that you might

fall asleep with the heatpad still switched on, use temperature level 1.

AUTOMATIC SHUTDOWN

• The heating pad will provide a 3 hour heat treatment, then it will

automatically shut off. The standby led (2) will light up after the 3

hours of operating to indicate that the product has switched off

automatically.

USE