Dreamland N3902 Kullanım Kılavuzu - Sayfa 7

Isıtıcı Dreamland N3902 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Dreamland N3902 12 sayfaları. Boutique hotel 200 thread count cotton heated mattress protector
Ayrıca Dreamland N3902 için: Kullanım Talimatları Kılavuzu (12 sayfalar)

Sayfayı Yazdır

CONNECTING THE CONTROL(S) TO THE BLANKET

Place the connector of the control unit through the triangle opening that you will find

on the side of the elasticated skirt, see diagram [B]. Then join the connector (1) that

is attached to the blanket, to the control unit (2).

Ensure the connector is pushed fully home until the locking catch engages (see

diagram [B]).

Dual Control - Repeat the above procedure to connect the control to the other side

of the blanket.

Now cover your heated mattress protector with a top sheet and duvet.

Your Dreamland Boutique Hotel Intelliheat mattress protector is designed to FAST

PREHEAT your bed and it also responds to temperature changes while you sleep.

The digital intelliheat control has 6 temperature settings:

•

READY FOR BED temperature to pre-heat the bed

•

1-5 temperatures for night-time or continuous use

Connect the control connector (2) into the blanket connector (1) then plug into the

mains socket.

Switch on your Boutique Hotel Intelliheat mattress protector from the back of the

control (11) Diagram [C], by positioning the switch ON (I). The temperature setting (4)

Diagram [C] will default to the last one used, providing it has been set to that number

for a period longer than 5 minutes.

TO HEAT UP YOUR INTELLIHEAT MATTRESS PROTECTOR, YOU MUST

ALWAYS PRESS THE READY FOR BED FAST PREHEAT BUTTON.

READY FOR BED FAST PREHEAT: Press the Ready for Bed, fast pre-heat button on

the front of the control (8) Diagram [C]. The setting (5) (Diagram C) will be illuminated

in red on your LED Display (3) (Diagram C). Your blanket will be lovely and warm in

just 5 minutes.

IMPORTANT: The time required to heat the mattress protector may vary

depending on the room temperature. To judge the temperature accurately,

lie in the bed with the covers draped over you. Do not rely on a hand placed

on the bed.

TO SET FOR ALL NIGHT USE: RELEASE the Ready for Bed fast pre-heat

button, and press the temperature button (9) Diagram [C] to select your preferred

all night temperature setting from 1 (min) to 5 (max). The higher the number, the

higher the temperature. This will be illuminated in orange on the (3) LED display (4)

(Diagram C).