Electrolux ZUCI Manuel - Sayfa 10

Bulaşık Makinesi Electrolux ZUCI için çevrimiçi göz atın veya pdf Manuel indirin. Electrolux ZUCI 16 sayfaları. Undercounter dishwasher
Ayrıca Electrolux ZUCI için: Kurulum, Kullanım ve Bakım Kılavuzu (20 sayfalar)

Electrolux ZUCI Manuel
C
Our appliances have been studied and optimised to give high performance. This appliance must be used exclusively
for the purpose for which it has been designed, i.e. for washing dishes with water and specific detergents. Any other
use is to be considered improper.
This appliance does not carry out the rinse cycle should there be no supply water; it stops all functions with an error
message "A1" (also see "Warning messages").
Carry out a couple of cycles without dishes to flush out any industrial grease which has remained in the
tank and piping.
Avoid washing decorated dishes.
Do not allow silverware to come into contact with other metals.
Do not allow food to dry on the dishes.
Remove large food scraps from the dishes to prevent clogging the filters.
Pre-wash the dishes by spraying them with cold or lukewarm water, without using any detergent.
Use automatic dispensers for the detergent.
If there is no automatic dispenser, pour a non-foaming detergent into the tank when the water has reached
the washing temperature.
A
LEGEND:
A = on/off
B = drain/self-cleaning cycle
K = display
D = "tank" indicator light
Figure 17
The temperature shown on the display is that of the boiler if the indicator light "E" is on or of the tank if the light "D" is on.
The tank temperature is displayed during the wash cycle and the boiler temperature during the rinse cycle.
C1
STARTING
Open the water supply cock.
Switch on at the mains.
Open the door and check that all the components
are in their correct position.
Close the door and press button "A".
The indicator light of button "A" (Figure 17) comes on,
indicating that the dishwasher is powered and that
water is being introduced and heated. The word "FILL"
is shown on the display during the entire filling and
heating stage:
12

INSTRUCTIONS FOR THE USER

B
FILL
TIPS
CONTROL PANEL
K
D
E
E = "boiler" indicator light
J
= wash cycle 1
H = wash cycle 2
F
= wash cycle 3
For atmospheric versions only:
Warning, this dishwasher does the first tank filling
through several consecutive hot rinse cycles, while the
display shows the message FILL (flowing).This system
let save up to 30% of time than traditional models.
If the door is opened during this stage the message
"CLOSE" will appear on the display:
The filling and heating stage has finished when the
display shows the tank temperature:
J
H
F
1
2
3
CLO
55°C