Andersen Astragal Mortise Değiştirme - Sayfa 3

Kilitler Andersen Astragal Mortise için çevrimiçi göz atın veya pdf Değiştirme indirin. Andersen Astragal Mortise 5 sayfaları. For e-series hinged inswing and outswing type i and ii patio doors

Sayfayı Yazdır

Interior

Astragal

Door Panel

Place the panel interior side up on a flat, clean, dry surface. Break

varnish or paint seal by scoring between panel and astragal with

utility knife.

Interior

Shoot-Bolt Guide

Pull weatherstrip back and remove shoot bolt guide on bottom of

panel. Repeat for shoot bolt guide at top of panel. Save shoot bolt

guides and screws for reuse.

Interior

Remove astragal.

9069203

Panel Interior Side Up

Utility Knife

Shoot Bolt

Weatherstrip

Astragal

Interior

Astragal

Foam

Corner Pad

Note position and location of top and bottom foam corner pads on

face of astragal. Carefully remove foam corner pads and save for reuse.

Outswing doors have corner pad at bottom only.

Top interior corner of panel shown

Interior

Astragal Screws

Remove astragal screws, full length, and save for reuse.

Note sizes and locations of top and bottom shoot bolts. Unscrew top and

bottom shoot bolts from astragal mortise lock using pliers. Remove top

and bottom shoot bolts and save for reuse.

Needle Nose

Pliers

Bottom Shoot Bolt

Pliers