Andersen VeriLock Manuel - Sayfa 11

Kilitler Andersen VeriLock için çevrimiçi göz atın veya pdf Manuel indirin. Andersen VeriLock 13 sayfaları. Security sensor lock
Ayrıca Andersen VeriLock için: Manuel (6 sayfalar), Manuel (6 sayfalar), Uygulama (10 sayfalar), Uygulama (6 sayfalar), Manuel (6 sayfalar), Manuel (5 sayfalar), Servis Kılavuzu (6 sayfalar)

Sayfayı Yazdır
Order Designation Description
Viewed from the exterior.
12d
FWH
6068 A
P
L R
Cylinder
Magnet Cap
Cylinder
Magnet Cap
Frenchwood
®
®
Active Panel
Left
Hinged Inswing
Hinged
(panel used
most often)
Patio Door
Door Rough
Door Rough
Passive
Opening
Panel
Interior View
Interior View
FWH Frenchwood Hinged Patio Doors - Outswing
Interior View
Interior View
Install magnet on your SINGLE operating, INSWING, door as shown.
Install magnet on your SINGLE operating, INSWING, door as shown.
9139831
For SINGLE Operating, INSWING Doors Only
For SINGLE Operating, INSWING Doors Only
6068 S
A
L
FWH
Cylinder Magnet
Cylinder Magnet
Press cylinder magnet firmly
Stationary
Left
Frenchwood
into preferred color cylinder
Panel
Hinged
Hinged Inswing
magnet cap.
Patio Door
Press cylinder magnet firmly
Active
Right
into preferred color cylinder
Opening
Panel
Hinged
magnet cap.
5/16" Drill Bit
5/16" Drill Bit
Order Designation Description
Viewed from the exterior.
Viewed from the exterior.
FWO
6068 A
Stationary
Left Hinged
(non-operating panel)
Frenchwood
Active Panel
®
Hinged Outswing
(panel used
most often)
Patio Door
Door Rough
Opening
FWH
6068 A
9068 S
A
Frenchwood
Active Panel
®
®
Stationary
Stationary
Hinged Inswing
Panel
Patio Door
Door Rough
Door Rough
Active
Opening
Opening
Panel
Strike Plate
Strike Plate
Jamb
Jamb
P
L R
Right Hinged
(hinges on left)
(hinges on right)
Left
Hinged
Passive
Right
Panel
Hinged
11
As viewed from
the exterior.
As viewed from
the exterior.
S R
S
R
Right
Hinged
Panel
Open door and mark magnet
location on jamb (even with
Stationary
Right
bottom strike plate screw
Panel
Hinged
and centered in the area
between the strike plate and
jamb edge).
Open door and mark magnet
location on jamb (even with
bottom strike plate screw
and centered in the area
between the strike plate and
jamb edge).
Edge of jamb.
Edge of jamb.
Drill 5/16" hole, 1" deep, at
marked location.
Drill 5/16" hole, 1" deep, at
marked location.
Insert cylinder magnet with
cap into drilled hole.
Insert cylinder magnet with
cap into drilled hole.
Active Panel
(operating panel
used most often)
FWH
6068 A
Frenchwood
Active Panel
®
Hinged Inswing
(panel used
most often)
Patio Door
Door Rough
Opening
Passive Panel
(operating panel with
attached astragal)
P
Passiv
Pane