Communications Specialties Fiberlink 7510 Series Kullanıcı Kılavuzu - Sayfa 10

Verici Communications Specialties Fiberlink 7510 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Communications Specialties Fiberlink 7510 Series 20 sayfaları. 7500 series dvi and stereo audio transmission over one single mode or multimode fiber

Sayfayı Yazdır

Fiberlink® 7500 Series

Lock Bandwidth and Input Equalization

The 7500/7510/7514 and 7502/7512/7516 transmitter units have a Lock Bandwidth (BW)

and Input Equalizer (EQ) Setting Dip switches located on the front panel. The default

equalizer (EQ) setting is for a short DVI cable, less than 10 feet. The default Bandwidth (BW)

setting is NARROW BW. This should work for most clean, "noise-free" DVI sources. A narrow

bandwidth setting should be used for dirty or noisy DVI sources.

Factory Default:

Switches 1, 3 and 4 in the up position; switch 2 in the down position.

1 2 3 4

Lock Bandwidth:

Switches 1 and 2 control the Lock Bandwidth:

Wide

1 2 3 4

Input Equalization:

Switches 3 and 4 control the Input Equalization:

Short

1 2 3 4

Page 10

Medium

1 2 3 4

Medium

1 2 3 4

Lock Bandwidth & Input Equalization

Narrow

1 2 3 4

Long

1 2 3 4

Fiberlink® 7500 Series User's Manual

Very Narrow

1 2 3 4

Very Long

1 2 3 4