Communications Specialties Fiberlink 7514 Kullanıcı Kılavuzu - Sayfa 7
Verici Communications Specialties Fiberlink 7514 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Communications Specialties Fiberlink 7514 20 sayfaları. 7500 series dvi and stereo audio transmission over one single mode or multimode fiber
Sayfayı YazdırFiberlink® 7500 Series
Installation Instructions (cont.)
Figure 1:
Power Connector
DC Input Polarity
EDID Switch Settings
The EDID Switch has two positions, Internal and Loop, as described in the chart below. For
complete instructions on how to operate the 7500 Series' Triple EDID function, please refer
to the "Triple EDID Function" section of this manual on page 8.
EDID Switch Settings
Internal
Loop
Fiberlink® 7500 Series User's Manual
Installation Instructions | EDID Switch Settings
9-24 Volts
AC or DC
When the switch is in this position, the EDID will be
automatically generated. Alternatively, if EDID
information was previously captured and stored, the
unit will use the stored information.
The EDID information will be passed through to the DVI
source from the display connected to the loop-through
port of the unit. If no loop-through display is connected,
the DVI source may not generate a DVI signal.
( - ) Negative
(+) Positive
Page 7