Atid ATD100B Hızlı Kılavuz - Sayfa 2

Kart Okuyucu Atid ATD100B için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Atid ATD100B 2 sayfaları. Desktop reader

Check product installation and operation

1 Please connect the RJ9 gender Connector to the product body, and fix the screw

using a coin or screwdriver.

2 Connect the RJ 9 cable to the USB port on your PC.

3 Press the power button for 2 seconds to turn on the power.

4 After running Notepad on a PC, when the tag is close to the main antenna,

the data onto the recognized tag is displayed in Notepad.

RFID Output Strength Control

1 Press the power button and the Communication Mode Switch Button simultaneously

for 5 seconds to enter the output Strength switching mode.

2 Press the Communication Mode Switch Button to Control the output Strength.

3 Restart the machine by pressing the power button or the reset button to apply the

current settings.

USB

Output Strength

9dBm

12dBm

Caution

- The power is automatically turned off if it does not operate in 1 hour based on the last tag

recognition time.

- If the power is turned off, press the power button again for 2 seconds to turn on the power.

Weak

Caution

Once recognized, the tag will not be

recognized again for 10 seconds.

Press simultaneously for

5 seconds.

USB

Strong

18dBm

15dBm