Dreamline ENIGMA Kurulum Talimatı - Sayfa 2

Banyo Armatürleri Dreamline ENIGMA için çevrimiçi göz atın veya pdf Kurulum Talimatı indirin. Dreamline ENIGMA 12 sayfaları. Shower door
Ayrıca Dreamline ENIGMA için: Kurulum Kılavuzu (12 sayfalar)

Sayfayı Yazdır

Preparation

1. After opening all boxes and packages, read this introduction carefully. Check that all of the

needed parts are included in the package, by marking all the components on the "Detailed

Diagram of Shower Door Components". Examine boxes and packages for shipping damage. If the

unit has been damaged, has a finishing defect, or has missing parts, please contact our customer

support department within 3 business days of the delivery date. Please note that DreamLine

will not replace any damaged products or missing parts free of charge after 3 business days

or if the product has been installed. Feel free to contact DreamLine

2. If this unit is going to be installed in a new construction, please, install all of the required

plumbing and drainage before installing the shower. Use a competent and licensed (if required

by local code) plumber for all plumbing installation

3. Please note that you should consult your local building codes on questions on installation

compliance standards. Building and plumbing codes vary by location, and DreamLine is not

responsible for code compliance standards for your project.

4. Please insure that prior to the installation the tub is leveled and solid and will be able to support

the total weight of the unit. Also make sure the walls are at right angles. While some adjustment

in leveling of the door is possible, irregular tub level or improper angle of side walls will result in

serious problems for your installation. Please, note that some adjustments and drilling might be

necessary during the installation process .

5. This unit has to be installed against a finished floor and walls.

6. Please, NOTE! This door does not have out-of-plumb adjustment. Make sure your walls are

at right angles.

7. This door requires 3

8. Please note that Step 7 calls for installation of the door to the wall using anchors. However,

the manufacturer strongly recommends installing these heavy doors to the studs or to

preinstalled 2x6 wood reinforcement behind the wall and attaching the Wall brackets to it.

Tape

Caulk

Measure

Level

Detailed Diagram of the Shower Door Components

Rev 2.1

1/2

" wide threshold or installation space.

Tools Required

Phillips

Pencil

Screwdriver

Caulk

Electric

Gun

Drill

if you have any questions.

Drill bit

(Ø=5/16")

Hammer

Miter saw or Hacksaw

Drill bit

(Ø=3/8")