Community C4 Kurulum ve Kullanım Kılavuzu - Sayfa 13
Konuşmacılar Community C4 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Community C4 16 sayfaları. 4.5", 6.5", 8" full-range c series coaxial ceiling loudspeakers
Ayrıca Community C4 için: Kurulum ve Kullanım Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Painting the Loudspeaker
The loudspeakers' textured white
finish complements most decors and
does not require further painting.
However,
if
the
interior
requires a custom loudspeaker finish,
these loudspeakers are easy to paint.
It is best to paint the baffle before
installation. In cases where it needs
to be finished along with the ceiling,
the loudspeaker baffle can be painted
after mounting in the ceiling.
Note: The paint masks provided by
Community are intended to PREVENT the
loudspeakers from receiving any paint.
Caution: NEVER use abrasives,
gasoline, kerosene, acetone,
methyl ethyl ketone (MEK),
paint thinner, harsh detergents or other
chemicals. These chemicals and agents
may permanently damage the finish.
Some are also toxic and highly
flammable.
Optional Accessories
Community offers helpful optional accessories that are not included with the
basic packages. Please be sure to order these parts separately if you need
them.
Can Adapter Trim Rings allow you to mount an entire C SERIES loudspeaker
assembly into an existing industry back can that is already in the ceiling from a
previous installation. If you're performing a retrofit, you will want to order the
type of adapter you need in the size suitable for the loudspeaker.
The Can Adapter Ring can be used as a Trim Ring, allowing you to mount a
C SERIES loudspeaker assembly into an existing but over-size ceiling cutout
hole. When used as a trim ring, white rubber hole plugs (included) fill the four
countersink indents.
A New Construction Bracket is available for installing loudspeakers in new
construction before drywall or plaster is put in place. The drywall typically is
cut with a router-type tool or laser guided cutter in which case the bracket hole
will serve as a cutout guide.
Model
C4
C6
C8
C SERIES Ceiling Loudspeakers
Type of Paint
The loudspeaker's ABS plastic baffle accepts almost any type of latex or oil
based paint. We recommend application of two coats.
design
Painting Process (to obtain the best results):
1. Clean the baffle with a light solvent such as mineral spirits, rubbing the baffle
with a lightly dampened cloth. Do not use abrasives such as sandpaper or
steel wool.
2. Mask the loudspeaker so that the surround, cone and center area will not
receive any paint. If the loudspeaker is already in the ceiling, you may wish
to mask the ceiling as well. Use a low-tack painter's tape. We advise against
using conventional masking tape and NEVER use duct tape in this application;
these kinds of tape generally leave adhesive residue that can be difficult to
remove and that may actually cause damage.
3. After cleaning, apply two or more two thin coats of either latex or oil-based
paints. Latex paint will adhere better if an oil-based primer is used first.
Apply the paint with a roller or brush, or spray it on.
4. The grille should be painted separately, and not in place on the loudspeaker.
We further recommend that you remove the grille's internal cloth mesh,
then spray paint the grille assembly. Avoid using a roller or brush to paint
the grille as its metal perforated holes may become clogged with paint,
which degrades sound quality and also may attenuate the sound. Reinstall
the internal cloth mesh (or if damaged install a new cloth mesh).
Can Adapter/
Size
Trim Ring
4.5"
C4-CATR
6.5"
C6-CATR
8"
C8-CATR
Installation and Operation Manual
New
Construction
C4-NCB
C6-NCB
C8-NCB
Can Adapter/Trim Ring
(shown with rubber hole plugs)
New Construction Bracket
Figure 14. Optional accessories
Page 13