ATIGO A1701 Kullanıcı Kılavuzu - Sayfa 7

İnterkom sistemi ATIGO A1701 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ATIGO A1701 10 sayfaları.

Sayfayı Yazdır
Change date / time & time zone
1.
With the monitor in standby mode, press
2.
Press
Setting button five times to enter Restore to default page
3.
Press and hold
4.
Use Unlock,
Monitor parameter settings
In order to enter the Installation setting page, follow below simple steps
1.
While in standby mode, press
2.
Press
Setting button six times
3.
Press and hold
4.
Use UP/DOWN buttons to increase or decrease the value
5.
Use
Call/Unlock 2
NOTE: As a shortcut, press and hold
installation setting page.
Check current monitor parameter codes
1.
Once inside the Installation setting page press
2.
Use UP/DOWN buttons to search for the code
Code
2419
Reset to default
2500-2549
Reserved
3006-3600
Monitor screen time
8000
Used to set Master monitor
8001
Used to set 1
8002
Used to set 2
8003
Used to set 3
8006
Used to set all Slave monitors to ring
8008
Used to set date as month/day/year
8009
Used to set date as day/month/year
8010
Unlock mode 0 or Fail-locked
Unlock button for 3s
nd
Call/Unlock 2
, UP and DOWN buttons to change the values
Setting button to enter Main Menu
Unlock button for 3s
nd
to select next digit from the 4 available
Setting button for 3s while in standby mode to enter
Description
st
Slave monitor
nd
Slave monitor
rd
Slave monitor
Setting button to enter Main Menu page
Unlock button
Code
8011
Unlock mode 1 or Fail-unlocked
8012
Used to set time as 12 hour format
8013
Used to set time as 24 hour format
8016-8017
Reserved
8018-8020
Video format
8401-8499
Unlock time (1~99 seconds)
9015-9016
Intercom ON/OFF
9017-9018
Memory ON/OFF
9101-9104
Reserved
9200-9216
Camera quality
9300-9301
Reserved
Description