Bosch Nexxt Premium Gas Operating Kullanım, Bakım ve Kurulum Talimatları Kılavuzu - Sayfa 26
Kurutucu Bosch Nexxt Premium Gas Operating için çevrimiçi göz atın veya pdf Kullanım, Bakım ve Kurulum Talimatları Kılavuzu indirin. Bosch Nexxt Premium Gas Operating 28 sayfaları. Dryer
Ayrıca Bosch Nexxt Premium Gas Operating için: Kullanım, Bakım ve Kurulum Talimatları Kılavuzu (28 sayfalar)
Sayfayı Yazdır
Changing
the Light
bulb
The dryer light turns on inside the
drum when you open the door.
To change the light bulb:
Turn off the circuit breaker.
PutI out power supply plug.
Open the door and locate the
tight bulb on the upper teft side
of the seat.
Loosen the screw of the cover
and open the cover.
Turn bulb counterclockwise.
Replace the bulb with a new
appliance
bulb only (obtainable
through
parts department).
Replace the cover and secure
with the screw.
Ptug in dryer or reconnect
power suppty.
RISK OF ELECTRICAL
SHOCK !
EXPLOSION
HAZARD!
Repairs or replacement
of parts
may be carried out by authorized
technicians
only.
Before calling the customer
service,
check whether you can rectify the
fault yourself by means of the
following
table.
If a fault cannot be rectified or
a repair is required:
1. Set program
selector to "Off".
2. Turn off the circuit breaker.
3. Pull the mains plug out of the
socket.
4. Close the shut off valve.
5. Call customer
service
(see page 27).
Problem
Dryerdoesnotstart.
"Start/Stop"indicatorlight doesnot
illuminate.
Laundryis wet after drying.
Programhasbeen interrupted."Lint
filter" indicatorlight illuminates,
a warningsignalis emittedand the
displayshows"E:O1",
Drumlightdoesnot function.
Possiblecause
Main plugnot inserted at all or not insertedcorrectly.
A fuse of powersupplyhastripped.
"Start/Stop"buttonnot pressed.
No programselected.
Doornot closed.
In Time-Programs d urationnot chosen.
Ambienttemperaturebelow41 °F/5 °C.
Theshut-off valveis closed.
Lint filter dirty.
Exhaust a ir duct is blockedor too long.
Fault in programsequence or malfunction,
The room/cabinet i s not adequately ventilated.
No programselected.
Lightbulbdefective,lightbulbburnedout.
No powersupply.
Remedialaction
Insertmainplug correctly,
Replace/switch o n fuse,
Press"Start/Stop"button.
Selectprogram.
Closedoor.
Chosetime via "Select"-Button.
Increaseroomtemperature.
Openthe shut-off valve.
Cleanfilter asdescribedon page25.
Switchoff/switchon again.
Cleanexhaustair duct, Reduce exhaustair duct to
maximumlengthas described on page10.
Switchoff/switchon again.
Switchoff dryer,leaveto cooldownfor 30 min,
switchon again.
Restartprogram.
Providean adequatesupplyof fresh air.
Switchoff/switchon again.
Selectprogram.
Changelight bulb,seepage26.
Guarantee powersupply.
26