Bosch WTA4410US Onarım Talimatı - Sayfa 19

Kurutucu Bosch WTA4410US için çevrimiçi göz atın veya pdf Onarım Talimatı indirin. Bosch WTA4410US 30 sayfaları.

Bosch WTA4410US Onarım Talimatı
6.8

Belt removal KI01

Take of the opening cover on the base plate.
Remove the belt from the belt tension adjuster.
Take off work top panel, facia panel, front panel and bearing.
(see dismantling bearing plate.)
6.8.1
Belt mounting
Draw up the belt over the drum
Hang up and bolt bearing plate
Stretch the belt with the belt tension adjuster
Close the opening on the base
Montage of the front panel, facia panel and work top panel.
113_58300000104082_ara_en_h.doc – 19.03.07
6.9

Belt Tension adjuster

Put the appliance on the backside.
Open the opening ion the base plate.
Take off the belt.
Remove the two screws of the belt tension adjuster at the base plate
and take off belt tension adjusters over the opening in the base plate.
Seite 19 von 30