Bosch WTC84100GB Kurulum ve Kullanım Kılavuzu için Talimatlar - Sayfa 7
Kurutucu Bosch WTC84100GB için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu için Talimatlar indirin. Bosch WTC84100GB 9 sayfaları.
Ayrıca Bosch WTC84100GB için: Özellikler ve Spesifikasyonlar (20 sayfalar)
Sayfayı Yazdır
Technical data
Dimensions (DxWxH)
60 x 60 x 85 cm
Weight
approximately 35 kg
Max. capacity
6 kg
Condensation container
approx. 4.2 l
Ambient temperature
5 - 35 °C
Connection voltage
220 - 240 V
Connected load
2300 W
Fuse protection
13 A
Product number
Production number
You can find the rating plate on the back of the dryer.
Consumption rates
These are guide values determined under standard
conditions. Deviations of up to 10 % are possible.
Cottons 6 kg
Cupboard Dry *
1400 (approx. 50 %)
1000 (approx. 60 %)
Iron Dry *
1400 (approx. 50 %)
1000 (approx. 60 %)
Easy-Care 3 kg
Cupboard Dry *
*Test program to DIN EN 61121.
**The values may deviate from the values shown here, because of over/undervoltage, type
of fabric, composition of the laundry to be dried, residual moisture in the material and size of
the load.
Optional accessories
Washer-dryer stack connection set
WTZ
The dryer can be placed on top of a suitable washing machine with the same width and depth
11311
to save space. This connection set must always be used to secure the dryer to the washing
machine. If the worktop of the washing machine is less than 544 mm deep, please consult
the after-sales service or your specialist retailer.
Platform
WMZ
For easier loading and unloading. The basket in the pull-out can be used for carrying the
20460
laundry.
Installation underneath the worktop
WTZ
10295
Risk of electric shock.
Instead of the appliance covering plate, you must have a metal cover fitted by an expert.
Rating plate or inside of the door
Spin speed in rpm
Drying time** in
(residual moisture)
minutes, includ-
ing 8 minutes
cool cycle
98
117
800 (approx. 70 %)
138
76
91
800 (approx. 70 %)
106
800 (approx. 40 %)
42
600 (approx. 50 %)
53
(order from the after-sales service using the order number)
What to do if ...
If you cannot rectify a fault yourself, please contact our after-sales service. We will always find
an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can
be found in the enclosed after-sales service directory, or by calling one of these numbers:
– GB 0844 8928979
– IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
The
Start/Stop indicator light
does not come on.
The Container/Clean indicator
light comes on.
The Container/Clean indicator
light is flashing.
Energy
Dryer does not start.
consumption**
in kWh
Programme stops shortly after it
has started.
3.20
Water is leaking out.
3.84
The door opens by itself.
4.48
The required degree of dryness
2.45
was not achieved or the drying
2.94
time was too long.
3.43
1.16
1.45
Laundry damp.
The humidity in the room
has increased significantly.
One or more indicator lights is/are
flashing.
Mains failure.
9
Mains plug plugged in?
Programme selected?
Check the socket fuse.
Empty the condensation container
page 4.
Clean the fluff filter
page 4.
Clean the air cooler if necessary
page 6.
Has the
Start/Stop button been pressed?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
Make sure the dryer is level.
Push the door closed until you hear it engage.
Clean the fluff filter
page 4.
Empty the condensation container.
Ambient temperature higher than 35 °C
Air inlet may be blocked
keep unobstructed.
Was an unsuitable programme selected?
Has the dryer been installed with sufficient space on all
sides? Ensure that air can circulate.
Mains failure
Restart the dryer.
Thin layer of limescale on the moisture sensors. Clean the
moisture sensors
page 6.
Use the next drying programme up or use the timer
programme as a supplement
page 7.
Warm laundry feels damper than it really is!
Make sure the room is sufficiently ventilated.
Air inlet blocked?
keep unobstructed.
Ensure that the air cooler is in use.
Clean the air fluff filter and air cooler if necessary
page 4/6.
Check the installation conditions
page 8.
Switch off, allow to cool, switch on again and restart the
programme.
Remove laundry from the dryer immediately and spread
out. This allows the heat to dissipate.
airing.
page 7.
10