Dreamline SHEN-1332460 Series Kurulum Talimatları Kılavuzu - Sayfa 14
Duş Kabinleri Dreamline SHEN-1332460 Series için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Dreamline SHEN-1332460 Series 18 sayfaları. Quatra lux shower enclosure
10.
Measure the bottom of the Door Glass (#02) from end to end to determine the actual width. Using
a razor knife, cut the Bottom Sweep Vinyl (#13) to the ewidth of the door glass. Optional: close the
door and mark the sweep where it overlaps the strike vinyl; then notch approximately 3/8" off of the
inner side of the Bottom Sweep Vinyl as shown in Fig. 16.2. Press the Bottom Sweep Vinyl tightly
onto the bottom edge of the Door Glass (#02). (Fig 10)
NOTICE: Make sure the Bottom Sweep Vinyl is flush with the vertical edge of the Handle
!
side of the Door Glass (#02).
11.
Take three measurements to prepare to notch the Hinge Side Vinyl (#12) to fit around the hinges:
• from the top edge of the Door Glass (#02) to the upper body
of the top Hinge (#06) (+) 7/8"
• from the lower body of the upper Hinge (#06) to the upper body
of the bottom Hinge (#06) (+) 1-3/4"
• from the lower body of the bottom Hinge (#06) to top
of the installed Bottom Sweep Vinyl (#13) (+) 1-7/8"
Cut the Hinge Side Vinyl (#12) according to the measurements.
Notch the cut strips to be able to slide them into the Hinge (#06) and around the sweep vinyl to cover
the space to the inline panel glass. Press the cut strips onto the vertical edge of the Door Glass (#02).
(Fig 11)
inside
hinge
panel
QUATRA LUX 32x46 34x46 shower enclosure manual Ver 3 Rev 4a 112019
1
door
door
2
+/-
Fig 10
1
door
4
Fig 11
3
2
3
5
6
door
4
13