Carogusto sisisi QEAMER Kullanıcı Kılavuzu - Sayfa 3
Kahve Makinesi Carogusto sisisi QEAMER için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Carogusto sisisi QEAMER 9 sayfaları.
Ayrıca Carogusto sisisi QEAMER için: Kurulum ve Kullanım Talimatları Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Additions to the user manual
Technical Service sisisi QEAMER 230V / 400V
2.2
For your safety
Below you will find updates to the current user manual concerning the safety of the
QEAMER.
How to avoid life threatening electric shock:
(Correction of the user manual version 400V, p. 8).
• The QEAMER must always be turned off at the main switch.
• The power plug must only be pulled out of the socket when the main switch is off.
• There is a danger to life if live elements are touched.
• Never remove covers unless you are explicitly instructed to do so.
• Never remove screws or any attached casing parts.
• Do not clean the machine or the installation area of the machine with a water
jet, high-pressure cleaner or steam cleaner. Never pour water over the
QEAMER.
Transport position (Correction of the user manual version 230V, p. 29 / 400V, p. 30)
• The QEAMER must only be transported after system drainage and in its transport
position. The transport position includes a program for system drainage that
prevents frost damage in the winter. If the QEAMER cannot be placed into the
transport position due to a malfunction, it must be stored in a frost-proof
location.
Danger of scalding
• There is a risk of scalding from hot components and liquids.
• Do not place any body parts in the preparation zone while the QEAMER is in
operation.
• The water in the drainage trough may be hot.
• After preparation, the bottom and sides of the bowl may be hot; always remove
the hot bowl using a napkin.
Malfunctions
• In the event of visible damage or detectable malfunctions, essential safety features
may be impaired. Detectable malfunctions include error messages on the display,
leaking water, odors, and heat development.
• In the event of a unit malfunction, it is essential to take appropriate measures
immediately to minimize potential risks and ensure the safety of all involved. First,
the affected device must be immediately taken out of service and all use stopped
to prevent further complications.
• In the event of a malfunction, the main switch of the device must be set to position
0 and then the main plug must be disconnected to interrupt the power supply. To
correct the problem, it is recommendable to have the QEAMER checked and
repaired by a qualified technician.
Erstellt von Carogusto AG am 22.09.2023
Carogusto AG / Fehlwiesstrasse 20 / CH-8580 Amriswil / Tel. +41 71 411 77 00 / sisisi.com
Version 1.0
Seite 3 von 9