CAROL BTM-311RH Kullanıcı Kılavuzu - Sayfa 6

Mikrofon CAROL BTM-311RH için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. CAROL BTM-311RH 9 sayfaları.

BTM-311RH Bluetooth Amplifier

3. Operating Instruction

3.1 Setting up

3.1.1 Plug the input end of the DC Power Adapter to a wall outlet, and connect the output end

to the DC Power Receptacle on the BTM-311RH.

3.1.2 Connect the speaker to the Speaker Connector. Red indicates positive, Black indicates

negative.

3.1.3 Press the BTM-311RH's Power Button to turn the power on. The status LED will continu-

ously light up green, it indicates the power is on.

3.1.4 Now, BTM-311RH is ready to be used with a microphone, sound source, and Bluetooth.

(as shown in Figure 3.1)

3.2 Audio & video conversion device (see Figure 3.2)

3.2.1 The signal source can be connected to the HDMI jack for image and sound inputs

3.2.2 Then, connect with RCA to convert into the CVBS format for image output.

( Figure 3.1 )

( Figure 3.2 )

3.3 Bluetooth Receiver:

3.3.1 The microphone and Bluetooth all have their own independent volume controller, so the

volumes can be adjusted individually, and you can adjust the ø 3.5mm and HDMI source

volume of the external sound source at the same time (as shown in Figure 3.3).

Bluetooth

Microphone

( Figure 3.3 )

3.3.2 Adjusting the volume too loud or moving the microphone too close to the loudspeaker

might cause annoying feedback. When this happens, turn down the volume to avoid

feedback.

3.3.3 BTM-311RH has independent Treble and Bass Volume Controllers, so the users are

able to adjust the Treble or Bass individually (as shown in Figure 3.4).

Treble

Bass

( Figure 3.4 )

External Sound Source

BTM-311RH Bluetooth Amplifier