Dreamline ENIGMA-Z SHDR-62606210-08 Kurulum Talimatları Kılavuzu - Sayfa 12

Sıhhi Tesisat Ürünleri Dreamline ENIGMA-Z SHDR-62606210-08 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Dreamline ENIGMA-Z SHDR-62606210-08 20 sayfaları. Shower door & tub door

Sayfayı Yazdır

Set the Stationary glass (#02) and

Upper Guide Rail (#03) aside, along with the

Guide block (#12) and Anti-splash

threshold (#15).

Remove the Guide Rail Brackets (#08) from

the Upper Guide Rail (#03) (as shown

below) and the Wall bracket (#19) from the

Stationary glass (#02). Place the Wall

bracket (#19) and Rail bracket (#08) on the

outlined positions and mark the holes for

drilling.

Drill the holes for the Wall bracket (#19) using a

Ø 5/16 drill bit and insert the Wall anchors (#9b).

(Fig. 10.1)

**Drill the holes for the Guide rail brackets (#08) using

a Ø 3/8" drill bit and insert the Wall anchors (9a)**.

**NOTE: The manufacturer strongly recommends

installing the guide rail brackets into studs or

pre-installed 2x6 wood reinforcements behind the

wall.

For installation into a stud, drill a Ø1/4" hole up

to the stud and let the screw bore into the wood.

Ø1/4"

(6mm)

ENIGMA-Z manual Ver 1 Rev 4 10/2016

See Fig. 9 for details

base

See Fig. 10 for details

Ø1/4"

(6mm)

sleeve

Separate the

Guide Rail Bracket (#08)

sleeve from the base by loosening the set

screws (leave the sleeve on the upper

guide rail and temporarily tigthen the set

screws)

3**

5**

Fig. 9

Ø5/16"

(8mm)

4**

Ø3/8"

(10mm)

6**

Fig 10