Advanced Methods in Innovation NASA/INVENTORcloud Mars Rover Kit Gaining Traction on Mars Montaj Talimatları Kılavuzu - Sayfa 10

Oyuncak Advanced Methods in Innovation NASA/INVENTORcloud Mars Rover Kit Gaining Traction on Mars için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Advanced Methods in Innovation NASA/INVENTORcloud Mars Rover Kit Gaining Traction on Mars 19 sayfaları.

Sayfayı Yazdır

B. Assembly Instructions

Please follow these instructions carefully and read every step completely prior to executing the step. Do

not overtighten screws – screws should be snug but there is no need to tighten as much as possible. All

tools needed to assemble the printer kit have been provided. Use the M3 hex key to tighten M3 screws

and the M4 hex key to tighten M4 screws. The color of certain components may change from photo to

photo and may not match your kit, however this is purely cosmetic and will not impact rove assembly.

1. Place a wheel washer on an M4 x 50 socket head cap screw

2. Pair an 18-tooth gear with a wheel by inserting the extruded hexagon on the gear face into the

hexagonal hole on the rear of the wheel

Gear flush against wheel

3. Insert the M4 x 50 screw with washer through the hole in the gear from the inside of the wheel

Wheel washer on M4 x 50 screw

Hexagon seated in wheel

NASA Mars Rover Kit Assembly Instructions

Insert on inside of wheel