Atim Cloud Wireless LORaWAN LW8-GW Kullanıcı Kılavuzu - Sayfa 10

Tekrarlayıcı Atim Cloud Wireless LORaWAN LW8-GW için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Atim Cloud Wireless LORaWAN LW8-GW 13 sayfaları.

Sayfayı Yazdır

Important observation

The repeater is not limited to one repeating device. Several products can operate with the same repeater. The only

limitation is the bandwidth (If two devices transmit their local frames at the same time, there will be a collision because

all the equipment involved in the repetition configuration are operating with the same radio configuration).

Installation and commissioning

•

Repeater installation

For the product to be repeated, the ACW / LW8-GW Repeater must indeed be provisioned on the LoRaWAN network

and that it has joined the network. Provisioning is conventionally done in OTA (Over the Air) using information from

DevEUI, JoinEUI and AppKey.

•

Configuration of the device(s) to be repeated

Once the repeater is installed, provisioned, and has joined the network, the product must be configured so that it

sends its business frames locally if no connectivity to the LoRaWAN network is found.

Indeed, this operating mode is not the default mode. The product must be configured to activate this compatibility

mode. This is done through the ACW configurator available here:

https://www.atim.com/en/downloading/

Once connected to the product, all you must do is change its radio parameters by applying the "LoRa / LoRaWAN

Repeater Mode Compat Mode" configuration as indicated below:

ATIM_ACW-LW8-GW_UG_EN_V1.1