Caroma G Series Kurulum ve Bakım Kılavuzu - Sayfa 6

Sıhhi Tesisat Ürünleri Caroma G Series için çevrimiçi göz atın veya pdf Kurulum ve Bakım Kılavuzu indirin. Caroma G Series 16 sayfaları. Electronic soap dispenser
Ayrıca Caroma G Series için: Kurulum ve Bakım Talimatları Kılavuzu (16 sayfalar), Kurulum ve Bakım Talimatları Kılavuzu (16 sayfalar), Kurulum ve Bakım Kılavuzu (17 sayfalar)

Sayfayı Yazdır
Caroma G Series Kurulum ve Bakım Kılavuzu

INSTALLATION

INSTALLING THE SOAP DISPENSER
Cut an adequate opening in the wall for
the dimensions of the soap dispenser
base (where you want to install the
spout) and the corrugated tube.
1
Disconnect the soap dispenser body with
the rosette from the base by unscrewing
the set screw.
Mount the soap dispenser base into the
opening in the wall and secure it using
the two anchors provided in the package.
Important: The soap dispenser base
2
should be installed so that the outside
surface of the finished wall falls between
the minimum and maximum lines marked
at the base.
Assemble the temporary protective soap
3
dispenser base cover.
Assemble the corrugated tube to the
soap dispenser base and make sure it
4
stays outside the wall when you do the
tiling.
4
SET SCREW
MIN MAX