Caroma G16004E6A Kurulum ve Bakım Talimatları Kılavuzu - Sayfa 12
Mutfak & Banyo Armatürleri Caroma G16004E6A için çevrimiçi göz atın veya pdf Kurulum ve Bakım Talimatları Kılavuzu indirin. Caroma G16004E6A 16 sayfaları. E hands free basin mixer/tap
Sayfayı Yazdır
sETTINGs ADjusTMENT
adjusting the sensor range without a remote control:
1. disconnect the power supply, battery or transformer, from the sensor.
2. activate the sensor three or four times.
3. Reconnect the power supply to the sensor.
4. to enter into the adjusting mode, put your hand in front of the sensor at a
distance of 2"(5cm) to 4"(10cm) within 5 seconds after the reconnection of the
power supply.
note: If you will not put your hand in front of the sensor after connecting the
power supply, the sensor will not enter into adjusting mode and the previous
setting will return.
5. When the sensor enters into the adjusting mode and your hand is in front of
the sensor, a slow flashing of the red light at the front of the sensor will occur.
6. Keep your hand at the front of the sensor until the slow flashing changes into
quick flashing. at this
point, move your hand
to the required distance
from the sensor and
wait until the red light
will stop flashing.
7. When the red light
has turned off, the
sensor
has
adjusted to the required
distance.
8. check the distance
you have set and if it is
not satisfactory, repeat
steps 1-6.
Mains option
been
Battery option
12