Ativa LD 800 Kullanıcı Kılavuzu - Sayfa 3

Kağıt Öğütücü Ativa LD 800 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ativa LD 800 15 sayfaları.

Sayfayı Yazdır

OPERATION

FIGURE 2

Using the switch located on the unit, select one of the following settings by sliding the switch either

left or right. (FIGURE 2)

AUTO / ON :

This setting allows the shredder to be automatically started by inserting paper into the

shred opening. Always feed the paper in as straight as possible. When the paper has

passed through, the shredder will automatically stop. (FIGURE 2)

OFF :

This setting turns off all features of the shredder. For safety reasons, we recommend that

you leave the shredder in the "Off" position whenever the shredder is unattended or not

in use. (FIGURE 2)

REV ( REVERSE ):

In the unlikely event of a paper jam, the reverse setting can be used to help clear the cutters

of paper that has not passed through. Never attempt to clear a jam by using the reverse

function until you have emptied the wastebasket. (FIGURE 2)

SAFE FEED™ technology is an added safety feature incorporated in this

particular model. It is a new technology where the shredder is able to detect

forced entry and automatically cuts the power off, preventing further shredding.

To begin shredding, locate the switch on the unit and select the "Auto" mode (FIGURE 2). The Green

LED light indicates the shredder is "On" and ready to use. Press the designated "PUSH OPEN" area

on the handle of the cover to tilt open and expose the paper feed slot (FIGURE 3). The cover will

click into a preset position where the "SHREDDER STATUS" indication line must align

with the "READY" setting.

FIGURE 3

FIGURE 4

OPERATION

READY: The shredder is currently on STANDBY and ready to operate when paper is inserted. With the

feed slot now exposed, you can shred sheets of paper or 1 credit card per pass (FIGURE 5).

DISABLED: The safety feature has been activated. All power to the SHREDDER IS

CURRENTLY SHUT OFF AND WILL NOT OPERATE until the cover is returned to the

"READY" setting. The cover has been completely tilted beyond the safe position (FIGURE 5).

When shredding is completed, you can press the designated "PUSH CLOSE" area on the cover to tilt

shut the paper feed slot (FIGURE 4). It is recommended to have the paper feed slot closed when shredder

is not in use to prevent any objects from accidentally getting into the feed slot.

Never shred large paper clips, window or insulated envelopes, continuous forms,

newsprint, bound pages (in example: notepads, checkbooks, magazines, etc...),

transparencies, laminated documents, cardboard, any items with adhesives, hard

materials or plastic (except Credit Cards).

This shredder will shred staples and small paperclips. It is recommended that you remove paper clips

whenever possible to extend the lifespan of your shredder.

Only shred credit cards by feeding them vertically into the middle of the entry,

releasing when shredding begins. Never feed more than one credit card at a time.

DO NOT ACTIVATE REVERSE FUNCTION WHILE SHREDDING CREDIT CARDS.

Overfeeding the shredder: Shredding beyond the specified sheet capacity can result in extensive

damage to the shredder. Overfeeding will strain the machine and quickly wear and break the cutting

blades and internal components.

Overheating with extended use: In the event that the shredder has shred continuously beyond

the maximum running time and overheating, the unit will automatically shut off. If this happens, switch

the shredder Off for 30 minutes or longer before resuming normal operation.

LED Status indicators:

Basket Full

FIGURE 5

Shredder

Power On

Overheat