Comnet Copper Line CLFEEOC Series Kurulum ve Kullanım Kılavuzu

Genişletici Comnet Copper Line CLFEEOC Series için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Comnet Copper Line CLFEEOC Series 12 sayfaları. Ethernet over copper extender with pass-through poe to 15 watts

Sayfayı Yazdır

This manual serves the following

ComNet Model Numbers:

CLFE1EOC

CLFE4EOC

CLFE8EOC

CLFE16EOC

CLFE1EOU

CLFE4EOU

CLFE8EOU

CLFE16EOU

TECH SUPPORT: 1.888.678.9427

INSTALLATION AND OPERATION MANUAL

CLFE(X)EO(C,U) Series

ETHERNET OVER COPPER EXTENDER

WITH PASS-THROUGH POE TO 15 WATTS

The ComNet

CopperLine® Ethernet over copper line supports up to sixteen

™

channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable

(CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a

PoE switch or the included power supply. Four, eight, and sixteen channel units

operate from local power. These units provide the ultimate flexibility for extending

a powered device (PD) over long distance copper. DIP switches are provided for user-

selection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.

Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment

operating status. Table 2 on Page 9 describes the LED indicators for each light on

the unit.

The CLFE8EO(C,U) and CLFE16EO(C,U) are 1RU rack mountable units. The

CLFE4EO(C,U) units are interchangeable between stand-alone or card mount

configurations, or may be DIN-rail mounted by the addition of ComNet model

DINBKT1 or DINBKT4 adaptor plate. The CLFE1EO(C,U) units are stand-alone, or

may be DIN-rail mounted by the addition of ComNet model DINBKT4 adaptor. See

Figures A through C on Page 11 for mounting instructions.

INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 1