Drehmo i-matic Kullanım Kılavuzu - Sayfa 10
Kontrolör Drehmo i-matic için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Drehmo i-matic 20 sayfaları. Electrical actuator with integral controls
Ayrıca Drehmo i-matic için: Kurulum ve Kullanım Kılavuzu (18 sayfalar)
Sayfayı Yazdır- 1. Connection on Matic C Base Plate DMC - 02 (Since Hw Rev. 5)
- 2. Connection on I-Matic Interface Unit DIM - 09 (Devicenet)
- 3. Connection on Matic C Display Unit DMC - 30 (Lcd Display Unit)
- 4. Connection on I-Matic Display Unit DIM - 02 (Ir / Irii)
- 5. Connection on I-Matic Interface Unit DIM - 17 (Modbus Loop)
After clicking "Finish", the Found New Hardware Wizard will continue by installing the COM
port emulation driver. The procedure is the same as that above for installing the serial
converter driver.
Open the Device Manager (located in "Control Panel\System" then select the "Hardware" tab
and click "Device Manger") and select "View > Devices by Type". The device appears as an
additional COM port with the label "Drehmo USB – TTL Converter".
DREHMO
Instruction manual for USB adaptor kit
page 10 of 20