Drehmo i-matic Kullanım Kılavuzu - Sayfa 15
Kontrolör Drehmo i-matic için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Drehmo i-matic 20 sayfaları. Electrical actuator with integral controls
Ayrıca Drehmo i-matic için: Kurulum ve Kullanım Kılavuzu (18 sayfalar)
Sayfayı Yazdır- 1. Connection on Matic C Base Plate DMC - 02 (Since Hw Rev. 5)
- 2. Connection on I-Matic Interface Unit DIM - 09 (Devicenet)
- 3. Connection on Matic C Display Unit DMC - 30 (Lcd Display Unit)
- 4. Connection on I-Matic Display Unit DIM - 02 (Ir / Irii)
- 5. Connection on I-Matic Interface Unit DIM - 17 (Modbus Loop)
3.2.2 Connection on i-matic display unit DiM - 22 (Bluetooth)
The following picture shows the position of the interface connector for the SER02 adaptor on
the DiM - 22 unit.
The position of the 4 pole pin connector is located in a horizontal position underneath
the mounted LCD panel on the electronic board edge. The expanded finger like
adapter outline protects against an unintended reverse polarity. The adaptor has to be
easily plugged in with a plug in depth of about 6mm.
DREHMO
Instruction manual for USB adaptor kit
page 15 of 20