Bosch 8-LI Professional Orijinal Talimat Kılavuzu - Sayfa 7
Matkap Bosch 8-LI Professional için çevrimiçi göz atın veya pdf Orijinal Talimat Kılavuzu indirin. Bosch 8-LI Professional 13 sayfaları. Jigsaw and sabre saw
Ayrıca Bosch 8-LI Professional için: Orijinal Talimat Kılavuzu (10 sayfalar), Orijinal Talimat Kılavuzu (39 sayfalar), Orijinal Talimat Kılavuzu (13 sayfalar), Orijinal Talimat Kılavuzu (8 sayfalar)
Sayfayı Yazdır
OBJ_BUCH-1066-001.book Page 17 Thursday, December 3, 2009 9:10 AM
Protect the battery against heat, e. g.,
against continuous intense sunlight,
fire, water, and moisture. Danger of
explosion.
In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
Use the battery only in conjunction with
your Bosch power tool. This measure alone
protects the battery against dangerous over-
load.
Use only original Bosch batteries with the
voltage listed on the nameplate of your
power tool. When using other batteries, e. g.
imitations, reconditioned batteries or other
brands, there is danger of injury as well as
property damage through exploding batter-
ies.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for driving in and loos-
ening screws and bolts as well as for tightening
and loosening nuts within the respective range
of dimension.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Screwdriver bit with ball catch*
2 Tool holder
3 Locking sleeve
Bosch Power Tools
4 "Power Light"
5 Fixture for carrying strap
6 Battery unlocking button
7 Battery*
8 Rotational direction switch
9 On/Off switch
10 Battery charge-control indicator
11 Handle (insulated gripping surface)
12 Universal bit holder*
13 Screwdriver bit*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Cordless Impact Screw-
driver
Article number
Rated voltage
No-load speed
min
Impact rate
min
Maximum torque,
hard screwdriving
application accord-
ing to ISO 5393
Nm
Bolt size
Max. screw dia.
mm
Tool holder
Net weight
Weight according
to EPTA-Procedure
01/2003
Technical data determined with battery from delivery
scope.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
2 609 140 699 | (3.12.09)
English | 17
GDR 10,8-LI
Professional
3 601 JA6 9..
V=
10.8
-1
0 – 2600
-1
0 – 3100
105
M4 – M12
8
¼" hexagon
socket
kg
0.96
kg
1.0