Comnet FDX72M1SHR Kurulum ve Kullanım Kılavuzu

Alıcı-Verici Comnet FDX72M1SHR için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Comnet FDX72M1SHR 7 sayfaları. Multi-protocol rs232/422/485 data transceiver featuring self-healing ring operation

Sayfayı Yazdır

INSTALLATION AND OPERATION MANUAL

FDX72(M,S)1SHR

multI-PRotocol RS232/422/485 DAtA tRANScEIVER

FEAtuRING SElF-HEAlING RING oPERAtIoN

the comNet™ FDX72(m,S)1SHR series Self-Healing Ring transceiver unit is

a fully-digital transceiver designed for implementing full RS232, RS422 or

RS485 2 or 4-wire traffic signalization/communications data networks of the

highest possible reliability. A network of FDX72SHR units can support one full-

duplex data channel or two half-duplex data channels. Full data re-clocking and

regeneration permit an almost unlimited number of transceiver/controller units

to be used within the network. these environmentally hardened transceivers are

ideal for use in unconditioned out-of-plant or roadside installations.

utilizing wave division multiplexing technology (WDm), only one optical fiber is

required between units to implement a fully self-healing ring. two FDX72SHR

units can be used in a redundant point-to-point topology.

Bi-color (Red/Green) lED indicators are provided for rapidly ascertaining

equipment operating status including the location of fiber breaks. See Figure 7

on Page 5 for an explanation of lED indications.

these units are interchangeable between stand-alone or card-cage mount

configurations. See Figure A on Page 7 for mounting instructions.

See Figures 1 – 8 for complete installation details.

INS_FDX72SHR_REV–

02/29/12

PAGE 1