Andis Blade Zero Gapper Kullanım ve Bakım

Kişisel Bakım Ürünleri Andis Blade Zero Gapper için çevrimiçi göz atın veya pdf Kullanım ve Bakım indirin. Andis Blade Zero Gapper 2 sayfaları. For outliner & styliner blades

Sayfayı Yazdır

Turn screws to the right to tighten.

Release the blade lock by pressing the button on the

left side of the locking arm. The button should click

into place.

Pull the upper blade adjustment bracket back to release

the blade set. Your blade set is now zero-gapped.

Remove blade assembly by pushing down on the front

of the blade.

USE AND CARE

Andis Blade

Zero Gapper

For Outliner

& Styliner

#04521, #04604, #26704, #32859

Requires only a screwdriver to adjust blade.

Phillips for Outliner

and T-Outliner

flathead and phillips for Styliner

Congratulations—you just went first class when you bought this

Andis appliance. Careful workmanship and quality design

have been hallmarks of Andis products since 1922.

Andis Company

1800 Renaissance Blvd. Sturtevant, WI 53177

1-800-558-9441 Canada: 1-800-335-4093

[email protected] w w w. a nd is. com

KEEP THIS FOR YOUR RECORDS

Form #04762

Blades

;

Printed in Taiwan