Andonstar 249 Kullanıcı Kılavuzu - Sayfa 13

Mikroskop Andonstar 249 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Andonstar 249 14 sayfaları.
Ayrıca Andonstar 249 için: Kullanıcı Kılavuzu (14 sayfalar)

Sayfayı Yazdır

Settings

In any mode, press and hold M button until it shows video/photo/playback menu, press M again, get into

Setting menu.

For example. In video mode, press and hold M button, it would show video menu as pic 9:

And then, press M again to get into settings menu as pic 10：

（pic 9 video menu)

（pic 10 setting menu）

Date/Time Setting

Select "Date/Time" in setting menu, press OK button to get in time setting. Use "up"and "down"

button to select correct number, OK to confirm and jump to the next one. After it's all done, press M to

back to setting menu.

Save setting

In order to let the microscope memorize the setting changes, please turn off the microscope by

PRESSING THE POWER BUTTON ON THE MONITOR (press and hold until it switch off).

Setting changes won't be saved if you switch off the device in other ways.

Trouble shooting

1.The microscope can't be switched on.

Please check the connection is exactly as pic 4 shows, power supply is strong enough (5V 2A & above)

and stable. If the device still can be not switched on, please pin the reset hole at the back side of monitor.

2.Images are not clear.

Please confirm the illumination work properly, and shine directly to the surface of the specimen. Adjust

the height of the boom arm, or the secondary bracket lift to change the distance from the lens to the

specimen, and turn the focusing tube properly. If the image is still blurry, please clean the bottom of the

lens use a piece of clean and soft cloth.