Andonstar AD407 Kullanıcı Kılavuzu - Sayfa 11

Mikroskop Andonstar AD407 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Andonstar AD407 14 sayfaları.
Ayrıca Andonstar AD407 için: Kullanıcı Kılavuzu (11 sayfalar)

Sayfayı Yazdır

Then, press MENU button (or M on the monitor) again, you get into the Setup menu, like this:

Netsetting:

Use "Up" and "Down" to select among "cross line"、 "line" 、 "direction" 、 "position" 、 "color"and "width".

Use "Left" and "Right" on the remote to change the settings. Without remote can not change any of the

settings of netsetting.

Cross line means 十 shaped lines that located literally in the middle of the view. when you set the cross line

"on", you will see one horizontal and one vertical showing in the middle of the view.

（P9,netsetting original）

When you turn on the "Line", there will be 8 lines showing up automatically. For each one, you could change

it's direction between "HOR" and "VER"(stand for "horizontal" and "vertical"), position, color and width.

There are 480 positions on direction "HOR", and 800 positions on direction "VER". So, when you change the

direction from "HOR" to "VER", the position would change at the same time, HOR/VER=480/800. For

（P7,video menu）

（P8,setup menu）

（P10,netsetting cross line on）