Andor Technology iKon-M Hızlı Başlangıç Kılavuzu
Dijital Kamera Andor Technology iKon-M için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Andor Technology iKon-M 2 sayfaları.
Sayfayı Yazdır
iKon Series Quick Start Guide
For iKon L (936) and iKon-M (934) models
1
Prepare your Facility
Handle the camera and accessories with
care.
Observe anti-static precautions when
installing the controller card and camera.
Ensure 100 mm clearance around camera
and power supply vents (Do not block vents
when operating on benchtop).
Operation of the camera close to intense
pulsed sources (e.g. plasma and X-ray
sources) may compromise performance.
Keep dry, <70% humidity non-condensing.
Use correct power supply and cables.
Store between -25°C and 50°C.
Operate between 0°C and 30°C.
Refer to the user manual for further information
2
Unpack the Camera
Camera
Essentials
Documentation
Software
scan or visit:
(copy supplied)
andor.oxinst.com/
welcome
iKon-M or L Camera
(model as ordered)
Hex Key Set
3
Install Software (SDK2 or Solis)
You must have administrator access on your PC to perform this installation.
These instructions cover installation of both Andor Solis and Andor SDK if ordered. A copy of the software is provided
within the camera box. Additionally, the latest software files are available to download on request, please sign in or
create an account at
andor.oxinst.com/downloads
Windows: Switch on the PC, run the setup exe from the supplied copy or the downloaded file: e.g. AndorSDK2Setup-
<version>.exe
1. Confirm the version of software (minimum is v2.1x)
2. Follow the on screen prompts.
3. Select the installation directory when prompted.
4. If prompted for camera type select iKon.
5. On the final window click on "Install". Continue to follow the on screen prompts.
6. To complete the installation, when prompted select "Yes, restart the computer now" and click on the finish button.
Linux:
For detailed instructions on how to install the SDK drivers on Linux please refer the Andor SDK2 Manual, available at
andor.oxinst.com/downloads.
Cables
USB 2.0 Cable
Trigger Cable
Country Specific
1 x BNC to SMB
Power Cord
Power Supply
PS-40 to Camera
1x iKon-M
Cable
2x iKon-L
iKon-L models only