Andor Technology AD02 Hızlı Başlatma Kılavuzu

Güvenlik Sensörleri Andor Technology AD02 için çevrimiçi göz atın veya pdf Hızlı Başlatma Kılavuzu indirin. Andor Technology AD02 4 sayfaları.

(1) Ensure the PC has a spare USB 2.0 compatible port available before commencing install

(2) Insert the device that contains the software then follow the on-screen instructions.

(3) Note which directory the software installs to, e.g.:

(4) Restart the PC when prompted to do so.

With the power turned OFF connect the camera to the supplied Power Supply Unit (PSU), then switch the

power ON and connect the camera to the PC using the supplied USB cable, e.g.:

The Operating System will automatically detect the camera and ask where the software drivers can be found.

Select the directory where the software was installed to.

NOTE: If the camera is disconnected then reconnected to another USB port, you may be prompted

to re- install the driver again. If this happens, select it from the directory indicated in item (3) of STEP 1

above.

Click on the

icon on your desktop and the Solis Splash Screen appears briefly:

The Main Window should then appear, similar to the following:

NOTE: When the application is started for the first time only, a prompt may appear requesting the

location of the driver. Get the driver from the directory indicated in item (3) of STEP 1 above. The

application then needs to be restarted.

QUICK LAUNCH GUIDE FOR

STEP 1 - INSTALL THE SOFTWARE

STEP 2 - CONNECT THE CAMERA

STEP 3 - START THE APPLICATION

Page 1 of 4

CAMERAS