Electrolux LIT60342 Kullanıcı Kılavuzu - Sayfa 10

Hob Electrolux LIT60342 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Electrolux LIT60342 20 sayfaları.
Ayrıca Electrolux LIT60342 için: Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

5.2 Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you

activate the hob,

• you spill something or put something on

the control panel for more than 10

seconds (a pan, a cloth, etc.). An acoustic

signal sounds and the hob deactivates.

Remove the object or clean the control

panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking zone

cool down before you use the hob again.

• you use incorrect cookware. The symbol

comes on and the cooking zone

deactivates automatically after 2 minutes.

• you do not deactivate a cooking zone or

change the heat setting. After some time

comes on and the hob deactivates.

The relation between the heat setting and

the time after which the hob deactivates:

Heat setting

, 1 - 3

4 - 7

8 - 9

10 - 14

5.3 The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat

setting or move your finger along the control

bar until you reach the correct heat setting.

5.4 Automatic Heat Up

Activate this function to get a desired heat

setting in a shorter time. When it is on, the

zone operates on the highest setting in the

beginning and then continues to cook at the

desired heating setting.

ENGLISH

The hob deactivates

after

6 hours

5 hours

4 hours

1.5 hour

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch

(

touch a desired heat setting. After 3 seconds

comes on.

To deactivate the function: change the

heat setting.

5.5 PowerBoost

This function makes more power available to

the induction cooking zones. The function

can be activated for the induction cooking

zone only for a limited period of time. After

this time the induction cooking zone

automatically sets back to the highest heat

setting.

Refer to "Technical data"

chapter.

To activate the function for a cooking

zone: touch

To deactivate the function: change the

heat setting.

5.6 Timer

• Count Down Timer

You can use this function to set the length of

a single cooking session.

First set the heat setting for the cooking

zone, then set the function.

To set the cooking zone: touch

repeatedly until the indicator of a cooking

zone appears.

To activate the function: touch

timer to set the time (00 - 99 minutes). When

the indicator of the cooking zone starts to

flash, the time counts down.

To see the remaining time: touch

the cooking zone. The indicator of the

cooking zone starts to flash. The display

shows the remaining time.

To change the time: touch

cooking zone. Touch

comes on). Immediately

comes on.

of the

to set

to set the