Electrolux 316488524 Kurulum, Kullanım ve Bakım Kılavuzu - Sayfa 16

Havalandırma Davlumbazı Electrolux 316488524 için çevrimiçi göz atın veya pdf Kurulum, Kullanım ve Bakım Kılavuzu indirin. Electrolux 316488524 20 sayfaları. 30” and 36” free-standing range hood

Electrolux 316488524 Kurulum, Kullanım ve Bakım Kılavuzu
16
16
16
16
16
Special functions

Clock programming

Clock pr
Clock pr
Clock pr
Clock pr
ogramming
ogramming
ogramming
ogramming
• The clock can be reprogrammed at any time except during an active timed function.
• The clock can be displayed in a twelve hour format and valid clock times are from 1:00 to 12:59.
• The clock can be reprogrammed pressing the "T T T T T imer
adjusted with the "
• The user can have minute increments / decrements of 1 minute, but if the user keep pressing the "
"
" buttons for more than 1 second, the increments / decrements will be of 5 minutes.
During this option the control will round to the nearest 5 minutes.
• The user can finish on reprogramming the clock pressing the "T T T T T imer
• After 1 minute of no button pressed the control will accept the programmed clock time and will add one
minute to the set clock.
Gr
Gr
Gr

Grease filter saturation alarm

Gr
ease filter saturation alarm
ease filter saturation alarm
ease filter saturation alarm
ease filter saturation alarm
• After thirty fan functional hours, the display will show "Gr
When this icon is shown in the display, the grease filters installed are required to be washed.
• To reset the grease filter saturation alarm the user must press the "
action the icon "Gr
Char
Char
coal filter saturation alarm (Recir
coal filter saturation alarm (Recir
Char
Char
Charcoal filter saturation alarm (Recir
coal filter saturation alarm (Recir
coal filter saturation alarm (Recirculating accessories)
• After one hundred and twenty functional hours of the fan, the display will show "Char
is active. When this icon flashes on display, the charcoal filters installed are required to be replaced or
reactivated.
• To reset the charcoal filter saturation indication the user must press the "
this time the icon "Char

Audible signal activation and deactivation

Audible signal activation and deactivation
Audible signal activation and deactivation
Audible signal activation and deactivation
Audible signal activation and deactivation
• The audible signals can be activated or deactivated pressing the "Light
• If the audible signal is activated, a tone must sound and the "Snd
2 seconds.
• If the audible signal is deactivated, the "Snd
tone must sound.
Char
Char
Char
Charcoal filter inclusion and exclusion (Recir
Char
coal filter inclusion and exclusion (Recir
coal filter inclusion and exclusion (Recir
coal filter inclusion and exclusion (Recirculating accessories)
coal filter inclusion and exclusion (Recir
• The charcoal filter inclusion or exclusion can be set by pressing the "
time for 5 seconds.
• The Inclusion or exclusion of charcoal filter must be selected while the lamps and the motor are OFF.
• When the charcoal filter has been excluded, the charcoal filter alarm is disabled.

Heat sensor

Heat sensor
Heat sensor
Heat sensor
Heat sensor
• The control is equipped with a heat sensor that will turn on the blower at second speed if excessive heat
occurs (over 158° F
• If the blower is OFF or if it is operating at first speed, the blower will be set automatically to second speed,
the display shows the word "CArE
• During this state, the user may raise the blower speed to third speed but can not decrease the speed.
• When the temperature level on the hood drops to normal, the blower will operate in the setting defined by
the user before the alarm occured.
" and "
" buttons. Colon ":" will flash indicating clock programming mode.
Gr Grease filter
Gr Gr
ease filter" is not displayed, and the hood has the normal display operation.
ease filter
ease filter
ease filter
Charcoal filter
Char
Char
Char
coal filter
coal filter
coal filter
coal filter" is not displayed and the hood has the normal display operation.
Snd" symbol must appear on the display for 2 seconds and no
Snd
Snd
Snd
158° F
158° F
70°C
70°C
158° F
158° F or 70°C
70°C
70°C) surrounding the control area.
CArE" to indicate that heat sensor has detected an excessive heat.
CArE
CArE
CArE
Control buttons - Special functions
imer" button for 5 seconds, and after, the clock can be
imer
imer
imer
imer
imer
imer" button.
imer
Gr Grease Filter
Gr Gr
ease Filter" if the fan is active.
ease Filter
ease Filter
ease Filter
" button for 5 seconds, after this
culating accessories)
culating accessories)
culating accessories)
culating accessories)
Light" button for 5 seconds.
Light
Light
Light
Snd
Snd
Snd" symbol must appear on the display for
Snd
culating accessories)
culating accessories)
culating accessories)
culating accessories)
Char
Charcoal Filter
Char
coal Filter
coal Filter" if the fan
coal Filter
Char
coal Filter
" button for 5 seconds, after
" and "
" buttons at the same
"/