Electrolux CH 910X Talimat Kitabı - Sayfa 6

Havalandırma Davlumbazı Electrolux CH 910X için çevrimiçi göz atın veya pdf Talimat Kitabı indirin. Electrolux CH 910X 21 sayfaları. Electrolux plc electrolux cooker hood instruction book ch 910

Sayfayı Yazdır
The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam.
The appliance can be installed to recirculate or extract contaminated air.
The hood can be switched on pushing directly onto the requested speed without fi rstly having
to select 0/1 button.
Touch
Basic functions

Dual Function

L
When briefl y pressed it switches the lighting system on/off.
When pressed for 2 seconds it starts the lighting system
in "courtesy light" mode.The lamps are fed at a reduced
power of approximately 5W. Such function can be stopp-
ed by pressing the touch control for 2 seconds or just by
pressing it shortly in order to return to the normal lighting
mode. In courtesy light mode the touch control is not lit.
T1
When pressed the motor is stopped, regardless of the
speed it is set to.
T2
When pressed the motor is set to the fi rst speed
T3
By a brief pressing the motor is set to the second speed.
By pressing the touch control for approximately 2 seconds the
Delay function is enabled, i.e delayed shutdown of the appli-
ance ensuring a complete elimination of the residual odours.
This function can be activated at OFF- position and at 1°, 2°
and 3°speeds. It can be stopped in advance by pressing any
of the touch controls (T) with the exception of T3. The Delay
function works according to the following scheme:
1°speed / OFF = 20 minuets
2°speed =15 minutes
3°speed = 5 minutes
T4
When pressed the motor is set to the third speed
T5
When pressed the motor is set to the intensive speed
timed to 5 minutes. At the end of 5 minutes of intensive
speed the hood starts again at the speed it was set to
previously. In case the hood is set to the intensive speed
directly from OFF-state it will then start from the fi rst
speed after 5 minutes of intensive speed.
F
When pressed for 4 seconds it resets the fi lter alarm s-
ignal indicated by fl ashing of the touch control T1.This
procedure can be carried out only when the motor is
stopped.

OPERATING INSTRUCTIONS

Control Panel

Indicator lights

Touch control unlit
Touch control lit
Touch control unlit
Touch control lit
Touch control unlit
Touch control lit
Flashing touch control
Touch control lit
Flashing touch control
6
Lights off
Lights on
Courtesy light on
Motor on
Motor off
Touch control lit
Second speed on
Delay function on
Touch control lit
Touch control lit
Metal grease fi lters saturation
alarm.Metal grease fi lters need
to be washed.The alarm starts
up after 100 working hours.
Charcoal odour fi lter saturaion
alarm.Charcoal fi lter has to
be replaced and metal grease
fi lters washed.The alarm
starts up after 200 working
hours.(Activation; check the
paragraph "Odour fi
lter")