Electrolux EFC 6426 Kullanıcı Kılavuzu - Sayfa 11

Havalandırma Davlumbazı Electrolux EFC 6426 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Electrolux EFC 6426 12 sayfaları. Electrolux cooker hood
Ayrıca Electrolux EFC 6426 için: Kullanıcı Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (12 sayfalar)

Sayfayı Yazdır

Concerns only the EFCR 942 model.

The hood is not equipped with an internal motor

and must be connected to an external motor (to

purchase separately).

The electrical connection must be carried out with

the help of suitable connections.

Attention! Use only the external motor

supplied by the constructor.

Connecting the waste disposal tube to the

external motor.

The external motor must be installed at a point

sufficiently spacious with respect to the regulations

in force.

The external motor must be connected to the

hood with a waste disposal tube with an adequate

diameter (min. 150 mm).

Note that the longer the waste disposal tube is,

the worse will be it aspiration capacity. The length

of the waste disposal tube must never, in any case,

be longer than 7 metres.

All the material necessary for connecting the hood

to the external motor (tubes, electricity cables,

etc.) is not supplied and must be purchased

separately.

Electrical connection of the external motor

· Check the position of the derivation box B

above the hood.

· Remove screws S and open the cover of box

· Open the cable cover removing screws L.

· Use an H05 VVF (3 x 0.75) type cable for

connecting the hood.

· Connect the motor cable clamps to the

terminal board in derivation box B on the

hood.

· Close the cable cover with screws L.

· Close the B cover and fix the S screws.

· Connect the hood to the power supply.

All manuals and user guides at all-guides.com

External motor (for external installation)

942 121 135

External motor (for external installation)

942 121 182

H05 VVF (3 x 0.75)

cable.

Fig. 11