Bosch 6 Series Kullanım Kılavuzu - Sayfa 15

Sayfayı Yazdır

Once the time has elapsed

The hotplate switches off. A warning signal sounds. The

time program function lights up

the display.

When the

symbol is pressed, the indications turn off

and the beeping stops.

Notes

To set a cooking time of under 10 minutes, always

■

touch 0 before you select the required value.

If a cooking time was programmed for several

■

hotplates, the time information for the selected

hotplate is shown in the timer display.

Select the relevant hotplate to call up the remaining

■

cooking time.

You can set a cooking time of up to

■

The kitchen timer

You can use the kitchen timer to set a time of up to 99

minutes.

This functions independently from the hotplates and

from other settings. This function does not automatically

switch off a hotplate.

Setting

Touch the

symbol repeatedly until the

indicator lights up.

‹‹

Set the desired time in the settings area.

After a few seconds, the time begins to elapse.

Changing or deleting the time

Touch the

symbol repeatedly until the

lights up.

Change the time in the settings area or set

to delete the programmed time.

When the time has elapsed

An audible signal sounds.

display and the

indicator lights up. The displays go

out after 10 seconds.

When the

symbol is touched, the displays go out

and the audible signal ceases.

for 10 seconds in

‹‹

minutes.

ŠŠ

lights up on the timer display.

indicator

in order

‹‹

appears on the timer

‹‹

vPowerBoost function

T he PowerBoost function enables you to heat up large

P o w e r B o o s t f u n c t i o n

quantities of water faster than when using heat setting

This function can always be activated for a hotplate,

provided the other hotplate in the same group is not in

use (see illustration). Otherwise,

the display for the selected hotplate; the

will then be set automatically without activating the

function.

In the combi zone, the PowerBoost function can

Note:

only be activated if the two hotplates are used

independently of each other.

Activation

Select a hotplate.

Touch the

symbol.

lights up on the display.

›

The function is activated.

Deactivation

Select the hotplate.

Touch the

symbol.

The

display goes out and the hotplate switches

›

back to the

heat setting.

The function is deactivated.

In certain circumstances, the PowerBoost

Note:

function can switch itself off automatically in order to

protect the electronic elements inside the hob.

PowerBoost function

and

will flash in

›

heat setting