Bosch 8 Series Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 35

¡ Observe different national installation instructions for

the hob.

25.4 Installation underneath a hob

If the appliance is installed under a hob, the following

minimum dimensions must be adhered to (including

substructure, if applicable).

Hob type

Induction hob

Full-surface induction hob

Gas hob

Electric hob

Observe different national installation instructions for the hob.

25.5 Installation in a tall unit

Observe the installation dimensions and the installation

instructions when installing in a tall unit.

¡ To ventilate the appliance, the intermediate floors

must have a ventilation cut-out.

¡ If the tall unit has another back panel in addition to

the element back panels, this must be removed.

¡ Only fit the appliance up to a height which allows

accessories to be easily removed.

a raised in mm

The minimum worktop thickness

required minimum clearance

a flush in mm

25.6 Installing two appliances on top of

each other

Your appliance can also be installed above or below

another appliance. Observe the installation dimensions

and the installation instructions when installing appli-

ances on top of each other.

¡ To ventilate the appliances, the intermediate floor

must have a ventilation cut-out.

¡ To ensure sufficient ventilation of the two appli-

ances, there must be a ventilation opening of at

least 200 cm² in the base area. To do this, trim the

base panel or fit a ventilation grille.

Installation instructions en

⁠ a is based on the

⁠ .

b in mm