Drew Technologies CarDAQ-Plus Hızlı Başlangıç Kılavuzu - Sayfa 12
Teşhis Ekipmanları Drew Technologies CarDAQ-Plus için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Drew Technologies CarDAQ-Plus 16 sayfaları.
Sayfayı Yazdır
Vehicle Connector
The mating connector is a standard
MVCI, High Density DB-26.
Pin #
Function
1
CAN2 Single Wire
J1850PWM+
2
J1850VPW
3
CAN2+
4
Case Ground
5
Signal Ground
CAN+ (CAN-C only)
6
SCI A Engine
5v-20v out
ISO-9141 K-line
SCI A Engine
7
SCI A Trans
SCI B Engine
8
No Connect
SCI B Trans
9
5v-20v
ground
10
J1850PWM-
CAN2-
11
5v-20v out
SCI B Engine
12
5v-20v
ground
13
5v-20v out
CAN- (CAN-C only)
14
SCI A Trans
5v-20v out
ISO L Line
15
SCI B Trans
Short-to-ground
16
Battery In (150mA @ 12 VDC)
17
Cable ID 2
18
Cable ID 1
23
+5 output (50mA fused)
26
Ground
Using Ethernet
CarDAQ-Plus's
recommended. No configuration changes are
the CarDAQ-Plus between LAN and in-vehicle use.
To a Laptop Directly
Connect the direct-connect Ethernet cable (blue with red ends) between
a PC and the CarDAQ-Plus. This is a crossover type, intended to connect
directly to a computer.
To an Existing LAN
Connect a standard Ethernet cable. On most LANs, CarDAQ-Plus can
obtain its IP address automatically using DHCP. Ask your network
administrator if this service is available on your network.
12
out
or
short-to-
out
or
short-to-
default
"Client
Ethernet Lights
Use the crossover cable (blue with
red ends) to connect directly to a
laptop.
The
CarDAQ-Plus has two indicator
lights.
Color
Left
Green
Right
Green
A/D Inputs Connector
The 12-bit analog inputs are setup
for an input range of 0 to 27.5VDC
and
are
electrically
against reverse voltage and over
voltage conditions. The Mating
connector is a High Density DB-15
Pin #
Function
2
Channel 6
4
Channel 3
6
Battery Voltage
8
Channel 4
10
Channel 1
12
Channel 5
14
Channel 2
1, 3, 5,
7, 9, 11,
Ground
13, 15
then
Server"
required when moving
Ethernet
port
Description
Ethernet Activity
Ethernet Link Light
protected
Direction
In
In
Out
(200mA
max)
In
In
In
In
mode
is
strongly
on